Part Names And Functions; Exterior - Sharp SF-2540 Operation Manual

PART NAMES AND FUNCTIONS

Exterior

q Document holder
w Exit tray
Finished copies are deposited in the exit tray.
e Document cover (optional in some areas)
Place the original on the document glass and
close the document cover before copying starts.
r Operation panel
All copier controls are located here for easy
operation.
t Document glass
Place the document to be copied here.
y Paper clip tray
Keep paper clips here.
u Original size detector
Detects the size of the original.
Do not place objects under this.
i Manual feed tray paper guides
Adjust to the width of the copy paper.
o Manual feed tray
Special papers (including transparency film) and
copy paper can be fed from the manual feed tray.
38
!0 Exit area cover
Open to remove misfed paper.
!1 Power switch
Press to turn copier power on and off.
!2 Duplex module or 500-sheet paper drawer
(optional)
The copier can be equipped with either a duplex
module or a 500-sheet paper drawer.
The front of the copier is closed up with a cover
when neither of these is required.
The duplex module provides duplex copying
capability.
!3 Lower paper tray
Holds 500 sheets of paper. Copy paper size can
be changed by changing the inner cassette.
!4 Front cover
Open to remove misfeeds and to service the
copier.
!5 Toner collecting container cover
Open to replace the toner collecting container.
!6 Handles
!7 Side cover
Open to remove misfeeds in the paper feed area.