Fisher-Price POWER WHEELS 78537 Owner's Manual & Assembly Instructions page 13

13
#8 x 1" Screws
Lip of
Bracket
Slot
• Fit the screw pegs on the windshield brackets into the
holes in the top surface of the dash. Press firmly to fit
the lip on each windshield bracket into the slot in the top
of the dash.
• Insert two #8 x 1" screws into each windshield bracket.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
14
• Align the slots in the front half of the windshield frame
with the tabs on the windshield brackets.
• Fit the front half of the windshield frame onto the
windshield brackets as shown.
Assembly
#8 x 1" Screws
Windshield
Brackets
Windshield Frame -
Front Half
Slots
Tabs
15
Hinge Pin
Windshield
Bracket
• Rotate the front half of the windshield frame down so it
lays flat on the vehicle body.
• Working from the center of the vehicle, insert a hinge pin
through the holes in the windshield frame and the holes
in a windshield bracket, as shown.
• Repeat this procedure to secure the front half of the
windshield frame to the other windshield bracket.
#8 x 1
16
Screws
Slots
• Fit the back half of the windshield frame onto the front
half of the windshield frame. Make sure the slots at the
bottom of the two windshield frame halves are aligned.
• Insert ten #8 x 1
windshield frame.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Helpful Hint! Squeeze the two windshield halves together
while tightening the screws.
13
• Lift the assembled windshield to the raised position.
Windshield
Frame -
Front Half
1 / "
4
Windshield
Frame -
Back Half
Windshield Frame -
Front Half
1 / " screws into the back half of the
4
#8 x 1 1 / "
4
Screws
Slots