Sharp SD-AT1000W Operation Manual page 21

" Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform steps 1 - 3 in "Manual or Auto tuning" on page 19.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUNER
PRESET ( or ) button to select
the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER
button to store that station in mem-
ory.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
" To recall a memorised station
1
Press the TUNER (BAND) button.
2
Press the TUNER PRESET ( or ) button to select the desired sta-
tion.
Preset channel
" To erase all the contents of the preset
memory
1 Press the ON/STAND-BY button to turn the power on, and press the TUNER/
BAND button.
2 Hold the CLEAR button down for 3 seconds or more.
3 Whilst "CLEAR" is flashing, press the ENTER
button.
04/7/9 SD-AT1000W_LAG_E3.fm
SD-AT1000W
ENGLISH
Frequency and frequency band
E-20
TINSZA121AWZZ
1
2
3
4
5
6
7
8