RusC2FaxADEN-F_V4_FM.book Page 84 Monday, August 20, 2001 10:52 AM
Reception Features
- Sending the Transfer Result
-
-
-
Report
This machine comp are s the fax
number of the Requesting Party with
the Requesting Party's number pro-
grammed in a Quick Dial or Speed Di-
al. If the lower five digits of the two
numbers match, it sends the Transfer
Result Report to the Requesting Party.
For example:
• Requesting
number:
001813-11112222
• Transfer Station's Quick Dial:
5
03-11112222
Transfer Result Report
This reports whether transmission to
the End Receivers was successful or
not.
Preparation
Program the Requesting Party fax
num be r in ad vanc e. ⇒ p.167
"Transfer Report"
When the Transfer Station has trans-
ferred the message to all End Receiv-
ers, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party. You must program the fax
number of the Requesting Party in a
Quick Dial in the Transfer Station.
Note
❒ You can choose whether a portion
of the original image is printed on
this report. Set this with the User
Parameters. ⇒ p.141 "Changing the
User Parameters"(Switch04, Bit7)
84
Party's
own
dial
ID Reception (Closed Network)
If you wish to limit reception of mes-
sages from those with machines of the
same make and with the same Polling
ID, contact your service representa-
tive to turn this feature on.
Note
❒ When you use this function, con-
tact your service representative for
details.
JBIG Reception
Fax Function Upgrade Unit is required.
It allows you to receive messages sent
in the JBIG format.
Limitation
❒ If ECM is turned off, JBIG Recep-
tion is not available.
❒ This feature is not available with
G4 communication.
❒ When the optional Extra G3 Inter-
face Unit is installed, JBIG recep-
tions of "G3-2" lines are standard.