Table of Contents
Advertisement
Formatting the SmartMedia™ Card
Formatting erases all images currently recorded on the SmartMedia™ card loaded on your camera. Protected
images are also erased. The SmartMedia™ card cannot be formatted if it is write-protected.
IMPORTANT
• The SmartMedia™ card must be formatted on the camera before use.
1. Set the mode dial to
E
When
2. Hold down the
The ERASE menu is displayed.
3. Use the
Make sure that [FORMAT] is displayed in yellow at the bottom right of
the screen.
4. Use the
the ENTER button.
To cancel formatting, select NO, and press the ENTER button.
5. To reset the image number, use the
select YES, and press the ENTER button.
To cancel resetting of image numbers, select NO, and press the
ENTER button.
,
is selected, the last image frame appears on the LCD monitor.
erase button for two seconds.
or
buttons to select FORMAT
or
buttons to select YES
or
.
.
1
, and press
2
or
buttons to
- 70 -
ERASE
0004
YES
2
NO
FRAME
ALL FORMAT
100
1
Advertisement
Table of Contents
