Table of Contents
Advertisement
Flash Photography
In the default setting, the flash will be automatically set to function in dark places. No special setting is needed to set
off the flash. The flash firing mode can be set to suit the conditions where the flash is to be fired.
The effective range of the flash is approximately 1.3 ft (0.4 m) to 8.2 ft (2.5 m).
1. Set the mode dial to
2. Press the flash button to set to the desired mode
while viewing the image on the LCD monitor or the
status display.
The icon for the mode that you selected is displayed in the LCD
monitor or the status display.
In the Manual Photography mode, the icon for the mode that you
selected is not displayed on the LCD monitor when the manual setup
screen is displayed.
Press the ENTER button to set the manual setup screen to not
display.
Pressing the flash button displays the available flash modes in order.
Auto
Red-Eye Reduction
3. Compose the picture. Press the shutter button
down halfway
down
.
2
or
.
Forced Flash
, then press it the rest of the way
1
- 45 -
Suppressed Flash
Slow Sync
Press down
1
halfway.
2
Press down
fully.
E
Advertisement
Table of Contents
