Formatting A Smartmedia Memory Card - Ricoh RDC-5300 Getting Started

Ricoh rdc-5300: user guide
Hide thumbs Also See for RDC-5300:
Table of Contents

Advertisement

• Insert the SmartMedia memory card in the correct direction. Do not insert it at
Note
an angle.
• The camera will not turn on when the card door is open.
Removing Card
q Check that the camera is turned off, and
then open the card door.
"Turning on the Camera" (p.41)
See
w Press the button and pull the
SmartMedia memory card straight out of
the slot.
Pressing the button will cause the SmartMedia
memory card to pop out a little. Then, pull it
straight out of position.
e Close the card door.
Important
• Never remove the SmartMedia memory card while data is being recorded
Note
or erased. The data stored on the card could be lost or damaged.
• When the SmartMedia memory card has been removed, place it in the
antistatic case supplied or other protective cover.

Formatting a SmartMedia Memory Card

Before using a new SmartMedia memory card or a SmartMedia memory card that has
been used on another device (such as a PC), you need to format (initialize) it with the
camera.
Important
• Formatting will erase all the files recorded on the SmartMedia memory
Note
card (including protected files).
• Do not format SmartMedia memory cards on a PC.
• The SmartMedia formatted by other devices may not be used.
1
33

Advertisement

Table of Contents
loading

Table of Contents