Lowrance Hds Outside Usa Or With Marpa / Chart Overlay; Simrad Nss - Lowrance Broadband 3G Installation Manual

Lowrance HDS outside USA or with MARPA / chart overlay

Simrad NSS

(NMEA2000 network)
The 3G and 4G radar connects to the Lowrance HDS and Simrad NSS in the same manner
HDS
NSS
_
+
1.
Lowrance HDS or Simrad NSS
2.
Broadband 3G™ or 4G™ Radar
3.
Interconnection cable (Lowrance 10 m (33 ft) Simrad 20 m (65.5 ft))
4.
RI10 Radar interface box
5.
Ethernet cable (1.8 m (6 ft)). The RI10 can connect either directly to a Multifunction display
or via an Ethernet switch (NEP-2), or a free port on an LSS-1 Structure scan module. For cable
options see "Ethernet cables" on page 28
6.
NEP-2 Network Expansion Port. 5 Port Ethernet switch
The following Parts required for MARPA and / or chart overlay:
7.
RC42 Heading Sensor
8.
SimNet cable. For cable options see "SimNet cables" on
page 28
9.
SimNet - NMEA2000 adapter kit: a) SimNet -Micro-C cable
0.5 m (1.6 ft), b) SimNet joiner. c) NMEA2000 T-Connector
Connect the Broadband radar to your display |
1
Lowrance HDS
or
Simrad NSS
FUSE
6
FUSE
FUSE
NMEA2000 Network
4
5
10
Parts required for chart overlay / MARPA
a
Broadband 3G/4G™ Radar Installation Guide
2
3
7
8
9
9
b c
| 15