goto cursor
Used to navigate to the cursor.
1. Move the cursor to a desired location
and press Menu.
2. Select Goto cursor and press enter.
Advanced Mode
Enables advanced features and settings.
The following features are enabled when Advanced
mode is turned on:
•
Navigation (Enables arrival radius, off-
course distance and Bearings setting)
•
Alarms (Enables arrival, off course and
anchor alarm options)
•
NMEA 0183 Output
•
Units (Enables distance, speed, depth,
temperature, and bearings options)
Basic Operation |
Elite-7m
Standby mode
Lowers power consumption by turning off sonar
and the display.
Press the PWr/Light key to
access the Backlight dialog.
Select Standby and press enter.
Press any key to resume normal
operation.
nOte: Leaving your unit in Standby
mode when your boat is not is use will run
down your battery.
restore defaults
Resets unit options and settings to defaults.
8