Lenovo Erazer X700 Hardware Maintenance Manual page 44

Step 7. Remove the 2 screws that secure power supply supporting bracket, remove the bracket and
put it aside. 7
Step 8. Remove the 4 screws that secure the Power supply to the chassis.
Step 9. Slide then lift the Power supply out of chassis.
Step 10. Install the new power supply：
a. Line up the holes on the new power supply with mounting holes on the rear of the chassis and
secure it to the chassis with the 4 screws.
38
Lenovo Erazer X700Hardware Maintenance Manual
8
9