Removal steps of camera
Remove the camera from the LCD cover as shown in the following illustration.
Note: The camera is stuck on the top center of the LCD cover.
When installing: Stick the camera to the top center of the LCD cover and adjust the placement to make sure
that the connector is attached firmly.
2030 LCD panel, LCD cable, and hinges
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 44
•
"1180 LCD unit" on page 66
•
"2010 LCD front bezel" on page 71
.
Chapter 7
Removing and replacing a FRU
73