•
"1010 Battery pack" on page 42
•
"1160 Speakers, LCD unit and base cover" on page 62
•
"2010 LCD front bezel" on page 67
Removal steps of the camera and microphone board
Detach the connector
1
Note: The camera and microphone board is adhered to the top center of the LCD cover.
When installing: Adhere the camera and microphone board to the top center of the LCD cover and adjust
the placement to ensure that the connector is attached firmly.
2030 LCD panel, LCD cable, and hinges
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 42
•
"1160 Speakers, LCD unit and base cover" on page 62
•
"2010 LCD front bezel" on page 67
68
Hardware Maintenance Manual
and then peel off the camera and microphone board
1
2
2
.