Table of Contents
Advertisement
Removing and replacing a FRU
2030 LCD panel, LCD cable assembly,
wireless LAN antenna assembly,
hinges, and LCD cover
For access, remove these FRUs in order:
v "1010 Battery pack" on page 72
v "1020 Ultrabay Enhanced device (for R52 series)" on
page 73
v "1030 Hard disk drive" on page 75
v "1050 Keyboard" on page 78
v "1060 Ultrabay device (for R50e series)" on page 82
v "1080 Modem daughter card (MDC-2)" on page 84
v "1090 Bluetooth/Modem daughter card (BMDC-3) (for
R52 series)" on page 86
v "1100 Keyboard bezel" on page 88
v "1120 Mini PCI adapter" on page 95
v "1190 Ultrabay Enhanced shield kit" on page 110
v "1200 LCD assembly" on page 117
v "2010 LCD front bezel" on page 131
v "2020 Inverter card" on page 133
Note: Some models may not have the wireless LAN
antenna cables.
Before removing the LCD panel, remove the left latch first.
In step 1 , unlatch the latch bar as in this figure.
134
R50e and R52 Series
Advertisement
Table of Contents
