Fisher-Price FIREROCK 73610 Owner's Manual & Assembly Instructions page 16

24
• Insert the tabs on the rear edge of the hood into the slots
in the front of the dashboard.
25
Lock
Fastener
Unlocked
• Using a slotted screwdriver, turn each lock fastener in
the hood 1 / turn to the locked
4
IMPORTANT! Remember to keep the lock fasteners
locked at all times to prevent children from accessing
the vehicle battery compartment.
Dashboard
Slots
Fastener
Locked
position.
Assembly
26
Hood
Tabs
• Fit the brush guard on the front end of the vehicle.
• Insert two #10 x 1" screws through the lower holes in the
brush guard and into the front end of the vehicle. Tighten
the screws.
27
Lock
• Fit the spacers between the top of the brush
guard and the front end of the vehicle.
• Insert two #8 x 4" screws through the two
upper holes in the brush guard, through the
spacers and into the front end of the vehicle.
• Tighten the screws.
16
Brush Guard
Spacers
Brush Guard