Fisher-Price FIREROCK 73610 Owner's Manual & Assembly Instructions page 14

16
• Place the dashboard on the top side of the vehicle body,
as shown.
• Insert five #10 x 1" screws through the dashboard and
into the vehicle body. Tighten the screws.
17
Steering Wheel
Large Opening
Large Opening "UP"
• Position the steering wheel with the large opening upright.
• Position the steering column so that the bend is upright,
as shown.
• Fit the steering column through the center hole in the
steering wheel.
Assembly
Dashboard
Steering Column
Bend
Upright
14
18
.437 Cap Nut
.437"
• Fit a .437 cap nut on the end of the steering column.
• Tap the cap nut with a hammer to secure the cap nut
on the steering column. Pull on the cap nut to be sure it
is secure.
Hint:
- You may need the help of another adult to keep these
two parts in the correct position.
- You may want to position the steering column on a
scrap block of wood to protect the assembly surface.
19
Steering Wheel Cap
• Fit the steering cap into the center of the steering wheel.
Be sure to align the notch in the steering wheel cap with
the tab in the center of the steering wheel.
• Insert two #8 x 1" screws through the steering wheel
cap and into the steering wheel. Tighten the screws.
End of Steering Column
Steering Wheel