AKURATE DS SYSTEM
INSTALLATION AND SETUP
9 FINAL STEPS
This section describes the final steps involved in getting the Akurate DS
system up and running.
Final steps
1.
Turn on the NAS.
2.
Turn on the Ethernet switch and the wireless access point.
3.
Wait for the NAS to finish booting.
4.
Turn on the Akurate Kontrol and wait for the standby symbol to
appear on the front panel.
5.
Turn on the Akurate DS player and the rest of the hi-fi system.
6.
Turn on the wireless control point and start the Linn GUI.
Follow the instructions in the Operation chapter of the Akurate DS
7.
owner's manual.
19
www.l i n n.c o .uk