Table of Contents
Advertisement
5
• Slide a round bushing onto the front axle and press it into
the center of the front wheel.
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it on the
front axle.
• Repeat assembly steps 4 and 5 to assemble the other
front wheel to the other side of the front axle.
6
Button End
Handlebar
• Insert the connector end of the handlebar wire harness
into the rectangular opening in the handlebar.
• Feed the handlebar wire harness through the handlebar.
• Push firmly on the button end of the handlebar wire har-
ness to snap it into the rectangular opening.
Assembly
Front Axle
Round
Cap
Bushing
Nut
Handlebar
Wire Harness
Connector
End
Rectangular
Opening
7
Guides
• Turn the handlebar upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar.
• Push firmly on the handlebar wire harness near each
of the guides to secure the wire in the underside
of the handlebar.
8
• Using the tip of a slotted screwdriver, press the metal
retainer on a handgrip streamer into the hole in a hand-
grip, as shown.
• Repeat this procedure to attach the other handgrip
streamer to the other handgrip.
9
Handlebar
Wire Harness
Handlebar
Handgrip
Handgrip Streamer
Advertisement
Table of Contents
