Power Button; Installing The Software - Linn AKURATE MUSIC SERVER Installation Manual

AKURATE MUSIC SERVER
INSTALLATION MANUAL

Power button

In the event that the unit does not power up when connected to the
mains supply, use a pin, straightened paper-clip or a similar implement to
press the power button, which is located behind the hole in the left-hand
side of the fascia.

Installing the software

The CD ROM included with the Akurate Music Server contains the Linntek
Setup and Control Utility for operating the unit via a PC. The CD ROM
also includes the owner's manual for the product in PDF format.
To load the software and view the owner's manual, you will require:
PC with CD ROM reading ability, Windows
Reader software.
®
To install the software and PDFs onto a PC:
Copy all of the files on the CD ROM into a directory on the computer, e.g.
'c:\program files\AMS'.
Double-click the Linntek.exe icon and the application will run. The default
setting is for Com 1 (the coms port can be changed in the Settings screen
on the utility).
If you have Acrobat Reader software installed on the PC, double click
® ®
the icon for the required owner's manual. Acrobat
available for free download from www.adobe.com
95 or above, Acrobat
® ®
Reader software is
® ®
Installing the Akurate Music Server
1. With the Akurate Music Server turned off, connect it via a hub/
router to the installation PC* and the NAS.
2. Turn the hub/router, PC and NAS on.
3. Wait until the NAS has finished booting-up, then connect the
Akurate Music Server to a monitor and keyboard.
4. Turn the Akurate Music Server and monitor on.
5. After the Akurate Music Server has completed its boot-up (it will
take approx. 5 minutes), press 'Alt+F2' to open the log-in screen.
6. Enter 'root' for the username, and 'aap' for the password.
7. Type 'r4' then hit the tab key. The command line will change to
'r4nas-setup'. Hit 'enter' to open the Network Settings screen.
8. Press '0' (zero).
9. For 'Port 0 DHCP? (y/n/d)' press 'n' then hit 'enter'.
10. For 'Port 0 IP address' enter the IP address of the Akurate Music
Server. Hit 'enter'.
11. For 'Port 0 IP network mask' enter '255.255.0.0'. Hit 'enter'.
12. For 'Port 0 IP gateway' enter a suitable address for accessing the
Internet via the router (usually this will be the router's IP address).
AN ADDRESS MUST BE ENTERED, even if no gateway exists.
Hit 'enter'.
3
w ww.l i nn. co .u k