Table of Contents
Advertisement
Assembly
Tab
Seat
Tab
Tab
Tab
18
19
• Using a Phillips screwdriver to
steady the screw and pliers to
grip the lock nut, continue to
tighten the bolt and lock nut
on each footrest.
20
1
#10 x
/
" Bolt
2
Shown Actual Size
Please Note: If you have already
charged your Power Wheels
Type H battery for at least 18 hours,
you may want to install it in the
battery compartment before
assembling the seat to your vehicle.
Please refer to the Battery
Installation section beginning on
page 20 for instructions.
• Insert the tabs on the front of the
seat into the slots in the vehicle
body.
• Press down on the back of the
seat to snap the tabs on the
back of the seat into the slots in
the vehicle body.
1
• Insert a #10 x
/
" bolt into the seat
2
and tighten the bolt with a Phillips
screwdriver. Do not over-tighten.
®
Advertisement
Table of Contents
