Handlebar
Handlebar
Wire
Harness
Hole
Cap Nut
Assembly
Cap Nut
Steering
Column
Steering Column
Bushing
End of Steering
Column
15
13
• Position the vehicle body upright.
• While fitting the handlebar onto
the end of the steering column,
insert the end of the handlebar
wire harness through the hole in
the front of the vehicle body.
• Fit a cap nut onto the end of the
steering column.
• Tap the cap nut with a hammer
to secure it on the end of the
steering column.
14
• Turn the vehicle body on its side.
• Fit a cap nut on the end of the
steering column.
• Tap the cap nut with a hammer
to secure it on the end of the
steering column.