Table of Contents
Advertisement
Charger
Connector
First-Time Battery Charging
25 amp
Fuse
Battery
Connector
Charger
10
1
• Insert a 25 amp fuse into the
battery. Do not remove the
battery from its protective foam
pocket.
Note: The top of the fuse will not be
flush with the top of the battery
when properly installed.
2
• Plug the charger connector into
the battery connector.
3
• Plug the charger into a standard
120 volt wall outlet.
Note: If power flow to the wall
outlet is controlled by a switch,
make sure the switch is "ON".
• Before first time use, charge the
battery for at least 18 hours.
Never charge the battery longer
than 30 hours.
Note: The battery must be upright
while charging.
Advertisement
Table of Contents
