Table of Contents
Advertisement
8
Side
Tab
Shifter
Handle
• Press the tab under the back of the seat and lift to
remove the seat.
• Fit the rectangular opening in the cowling over the shifter
handle.
• Align the front, side and rear tabs on the cowling with the
slots in the vehicle body but do not snap the tabs into
the slots.
• Make sure the harness wires are positioned in the
channel to prevent them from being pinched between the
cowling and vehicle body.
9
• Press firmly on the front of the cowling to snap the four
front tabs into the slots in the vehicle body. Make sure
the side and rear tabs stay aligned with the slots.
Note: Pull up on the front of the vehicle body while
pressing down on the cowling to make sure the front
tabs snap into the slots.
TM
Cowling
Side
Tab
Rear Tab
Channel
PRESS HERE
To Snap Front Tabs
Assembly
10
• Press firmly on each side of the cowling to snap the
four side tabs into the slots in the vehicle body. Make
sure the rear tab stays aligned with the slots.
Note: You may need to flex the shifter to the side to fit the
cowling over the high speed lock-out screw.
11
• Press firmly on the back of the cowling to snap the rear
tab into the slots in the vehicle body
11
PRESS HERE
To Snap Side Tabs
PRESS HERE
To Snap Rear Tabs
Advertisement
Table of Contents
