Seagate Barracuda 7200.8 Serial ATA Product Manual page 15

Table 3: Drive specifications for 250 and 200 Gbyte models
Drive specification
Wet bulb temperature
(°C max)
Altitude, operating
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle**
Performance seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Service life
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports Hotplug operation per SATA II specification Yes
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Barracuda 7200.8 Serial ATA Product Manual, Rev. F
ST3250823AS ST3250623AS
37.7 (operating)
40.0 (nonoperating)
–60.96 m to 3,048 m
+
(–200 ft to 10,000 ft)
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
300 Gs
5–22 Hz: Limited displacement
23–350 Hz: 0.5 G acceleration
5–22 Hz: Limited displacement
23–350 Hz: 5 Gs acceleration
2.8 (typical)
3.4 (max)
3.7 (typical)
3.9 (max)
14
1 per 10 bits read
0.34%
5 Years
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser
to access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be
asked to provide the drive serial number, model number (or part
number) and country of purchase. The system will display the war-
ranty information for your drive.
50,000
ST3200826AS
9