Seagate Barracuda 7200.8 Serial ATA Product Manual page 13

Table 2: Drive specifications for 300 Gbyte models
Drive specification
Wet bulb temperature
(°C max)
Altitude, operating
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle**
Performance seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Service life
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports Hotplug operation per SATA II specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Barracuda 7200.8 Serial ATA Product Manual, Rev. F
ST3300831AS
37.7 (operating)
40.0 (nonoperating)
–60.96 m to 3,048 m
+
(–200 ft to 10,000 ft)
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
300 Gs
5–22 Hz: Limited displacement
23–350 Hz: 0.5 G acceleration
5–22 Hz: Limited displacement
23–350 Hz: 5 Gs acceleration
2.8 (typical)
3.4 (max)
3.7 (typical)
3.9 (max)
14
1 per 10 bits read
0.34%
5 Years
5 years on distribution units.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You
will be asked to provide the drive serial number, model
number (or part number) and country of purchase. The sys-
tem will display the warranty information for your drive.
50,000
Yes
ST3300631AS
7