Table of Contents
Advertisement
2.14
Reliability
Measurement type
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Load/Unload (U/UL)
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
Insertion and removal cycles
Warranty
2.15
Safety certification
The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections
of IEC950 and EN 60950 as tested by U.L.
The drive cartridge material meets flammability resistance requirements as specified by UL94V.
2.16
Environmental protection
Seagate designs its products to meet environmental protection requirements worldwide, including regulations
restricting certain chemical substances.
2.16.1
European Union Restriction of Hazardous Substances (RoHS)
The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical
substances, including Lead (Pb), in electronic products effective July 2006.
A number of parts and materials in Seagate products are procured from external suppliers. We rely on the rep-
resentations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our
supplier contracts require compliance with our chemical substance restrictions, and our suppliers document
their compliance with our requirements by providing material content declarations for all parts and materials for
the disc drives documented in this publication. Current supplier declarations include disclosure of the inclusion
of any RoHS-regulated substance in such parts or materials.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Specification
14
1 per 10
bits read, max.
0.60%
At 2000 Power-On Hours (POH), nominal power, 25°C ambient temperature.
Max HDA case temperature: 65°C.
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
The Removable Drive Cartridge is designed to achieve 5000 insertion and
removal cycles when mated with a properly-designed receptacle. A cycle is
defined as a complete insertion and removal loop.
1 year.
To determine the warranty for a specific drive, use a web browser to access the
following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to pro-
vide the drive serial number, model number (or part number) and country of pur-
chase. The system will display the warranty information for your drive.
13
Advertisement
Table of Contents
