Fisher-Price POWER WHEELS BY FISHER PRICE 73210 Owner's Manual & Assembly Instructions page 20

34
Gas Tank
Tabs
Vehicle Body
• Balance the sound box on the vehicle body.
(The speaker should face down.)
• Fit the tabs at the bottom of the gas tank under the front
end of the vehicle body.
• Lower the gas tank on the vehicle frame, making sure
that the two small square openings in the gas tank fit
over the buttons on the sound box.
35
Gas Tank
• Insert a #8 x 3 / " screw through the hole in each side of
4
the gas tank and into the vehicle frame.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Assembly
Buttons
Sound Box
Vehicle
Frame
Vehicle
Frame
20
Hint: To replace the batteries in the sound box, simply
remove the screws from the gas tank and remove the gas
tank from the vehicle frame. After replacing the batteries,
be sure to replace the sound box, gas tank and screws.
36
PUSH
HERE
Tab
Seat
Note: You may want to install the Power Wheels
batteries before assembling the seat. Please see "Battery
Installation" on page 24 for detailed instructions.
• Fit the tab on the front of the seat into the slot near the
gas tank.
• Push down firmly near the back of the seat to snap it to
the vehicle.
Hint: You will need to remove the seat to access the
high speed connector and to charge the 6 volt batteries.
To remove the seat, press the tab at the back of the seat
and lift.
Gas
Tank
Tab
Slot
6 volt
®