Fisher-Price POWER WHEELS BY FISHER PRICE 73210 Owner's Manual & Assembly Instructions page 12

4
Vehicle
Frame
3
• Insert four #8 x / " screws through the vehicle body and
4
into the vehicle frame. Make sure the holes in the
vehicle body and frame are aligned.
• Tighten the screws using a Phillips screwdriver.
Do not over-tighten.
5
Retainer
Tabs
Top View
• Fit the motor harness wires between the retainer tabs so
that all four motor harness wires are contained in the
narrow rectangular opening.
• Fit the tabs on the top of one motor harness connector
into the slots in the bottom of the other motor harness
connector and squeeze firmly to re-join the two motor
harness connectors (see inset).
Assembly
Vehicle
Body
Narrow
Rectangular
Opening
Motor Harness
Connectors
Motor Harness
Connectors
12
6
Slots
Tab
• Fit the tabs on the left footboard into the slots in the left
side of the vehicle frame. Make sure both tabs are in
the slots.
Hint: You may need to squeeze the left footboard in order
to align the tabs with the slots.
• Insert two 3 / " screws into the left footboard as shown.
4
Tighten the screws using a Phillip screwdriver.
Do not over-tighten.
7
Right
Footboard
• The right footboard was inserted in the vehicle frame at
the factory. Make sure the right footboard is in place.
• Insert two #8 x 3 / " screws into the right footboard
4
as shown. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Tab
Left
Footboard
Vehicle
Frame