Fisher-Price POWER WHEELS BY FISHER PRICE 73210 Owner's Manual & Assembly Instructions page 10

1
Slots
Ribs
Battery
Connector
• Align the ribs on the top of one of the battery
connectors with the slots on the bottom of the other
battery connector.
• Stack the two battery connectors and press to join.
Note: Make sure that the two connectors on the charger
are also stacked and joined.
2
A-Style
Charger
Connector
A-Style
Battery Connector
GAP
Incorrect
• Plug the charger and battery connectors together.
Push firmly to snap the two connectors together.
Battery Charging
Battery Connector
NO GAP
Correct
3
• Plug the charger into a standard 120 volt wall outlet.
Note: If power flow to the wall outlet is controlled by a
switch, make sure the switch is "ON".
• Before first time use, charge the batteries for
at least 18 hours. Never charge the batteries longer
than 30 hours.
• Recharge the batteries for at least 14 hours after
each use of your vehicle. Do not charge the batteries
longer than 30 hours.
• Once the batteries are charged, disconnect the charger
connector from the battery connector. Unplug the
charger from the wall outlet. The batteries are now
charged and are ready to be installed in your vehicle.
Please see the Battery Installation section on page 24
for detailed instructions on installing your battery.
10