Before Using Your Power Inverter - Schumacher Electric XI41DU Owner's Manual

Power inverter converts 12v dc battery power to 120v ac household power
Hide thumbs Also See for XI41DU:
Table of Contents

Advertisement

Available languages

Available languages

1.4
Do not place the inverter in areas such as battery compartments
or engine compartments where fumes or gases may accumulate.
1.5
Keep the inverter dry.
1.6
DO NOT allow the inverter to come into contact with rain or moisture.
1.7
DO NOT operate the inverter if you, the inverter, the device being
operated or any other surfaces that may come into contact with
any power source are wet. Water and many other liquids can con-
duct electricity, which may lead to serious injury or death.
1.8
Do not place the inverter on or near heating vents, radiators or
other sources of heat or flammable materials.
1.9
Do not place the inverter in direct sunlight. The ideal air tempera-
ture for operation is between 50° and 80°F.
1.10
Only connect the power inverter to a 12-volt accessory outlet. Do
not attempt to connect the inverter to any other power source,
including an AC power source. Connecting to a 6-volt or 16-volt
battery will cause damage to the inverter.
1.11
Make sure the AC plug connection is tight.
1.12
Do not modify the inverter in any way including cables, plugs or
switches as it may result in property damage or personal injury.
1.13
damage and personal injury. The inverter output is 120V AC and
can shock or electrocute the same as any ordinary household AC
wall outlet.
1.14
Do not open – No user serviceable parts inside.
1.15
This device does not include an internal Ground Fault Circuit
Interrupter (GFCI).
2.

BEFORE USING YOUR POWER INVERTER

When you turn on a device or a tool that runs on a motor, the
device basically goes through two stages:
1.
Start Up – Requiring an initial surge of power (commonly
known as the "starting or peak load").
2.
Continuous Operation – Power consumption drops (commonly
known as the "continuous load").
The wattage (WATTS) or amperes (AMPS) can normally be found
stamped or printed on most devices and equipment, or in the
user's manual. Otherwise, contact the manufacturer to find out
Incorrect operation of your inverter may result in
• 2 •

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xi50duXi75du

Table of Contents