Sanyo XHS1271 Technical & Service Manual page 40

7-3-3. Remove the ceiling panel.
(1) Open the clamp (4 locations) and remove the 2 lead wires from the clamps. (Fig. 6)
(2) Remove the 4 screws fixing the corner cover (at 3 locations) and indicator cover (at 1 location). (Fig. 6)
(3) Press the center 1 of the cover and remove the cover with the section 2 pulled down. (Fig. 7)
(4) Remove the strap (3 locations) from the hook on the ceiling panel. (Fig. 8)
There is no strap on the indicator cover.
NOTE
(5) Remove the bolt (4 locations) with a washer and remove the ceiling panel. (Fig. 9)
Screw
Indicator
cover
Coner cover
Screw
Strap
Clamp
Coner cover
Coner cover
Fig.6
Remove the strap
from the hook.
Fig.8
Lead wire Pull down
section 2.
Clamp
40
Cover
Center 1
Fig.7
Bolt
Bolt
Fig.9