Advertisement
Storage
13
• With the legs all the way open, lower the seat to position 7 the
lowest position).
• Pull the frame release latches forward and push the rear legs
toward the front legs.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
Pull Frame
Release Latch
• The pad, frame and base tray may be wiped clean using a mild
cleaning solution and a damp cloth.
• The restraint system may be wiped clean or is machine
washable. Machine wash in cold water on the gentle cycle. Do
not use bleach. Line dry.
• The food tray, teether toy and restraint system are also top rack
dishwasher safe (or use bottom rack - without using the
drying cycle).
To remove the pad:
• Remove the elastic loops from the pegs on the back of the seat.
• From behind the product, squeeze the restraint release tabs and
remove the restraint system from the peg.
• From the front of the product, pull to remove the restraint system.
• Unfasten the pad hooks from the front edge of the seat. Lift the
top of the pad off of the seat back.
• To replace the pad: refer to Assembly steps 13-19.
IMPORTANT! Never use this product without the restraint
system. Replace the waist/shoulder belts and crotch belt.
Care
PRINTED IN MEXICO
L0542e-0726
Advertisement
