Kodak XLS 8400 PS User Manual page 78

Correcting Problems
4–2
CLEAR RIBBON JAM
The printer senses that ribbon is jammed. Open the printer cover, clear
the jam, and close the cover.
CLOSE COVER
The printer cover is open. Close it to make the printer ready.
INIT ERROR
The printer failed to initialize. Restart the printer. If the message is still
displayed, service is required.
INSERT TRAY
The printer senses that the paper tray is not in place. Insert the paper
tray to make the printer ready.
LOAD PAPER
( Paper Size)
The printer senses that the tray is empty or the wrong paper is loaded.
The message specifies the requested paper size.
LOAD RIBBON
( Ribbon Type)
The printer checks the ribbon's barcode and detects that the ribbon type
that is loaded does not match the requested ribbon type. Open the cover
and load the correct ribbon. The message specifies the requested ribbon
type.
LOAD TRANS
( Transparency Size)
The printer senses that the tray is empty or the wrong transparency
material is loaded. The message specifies the requested transparency
size.
SERVICE REQ XXX
The printer detects an error. The message includes a 4-digit error code.
Restart the printer. If the message is still displayed, service is required.
Part No. 4B1709 March 1995