How Do I Adjust The Sound; Turning The Speakers On - Kenwood VR-4700 Connection Manual

How Do I Adjust the Sound?

How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the receiver's
front panel or PowerTouch.

Turning the Speakers On

To turn on the front A (Room A with the VR-4900/KRF-V9993D) speak-
ers, press the DOOR OPEN/CLOSE key (VR-4900/KRF-V9993D) or press
the lower part of the door (VR-4700) to open the door and press the
SPEAKERS A key inside the door.
VR-4900/KRF-V9993D
VR-4700
To turn on the front B (Room B with the VR-4900/KRF-V9993D) speak-
ers, press the SPEAKERS B key located in the door of the receiver's front
panel. The lighting of a SPEAKERS (A or B) lamp indicates that the cor-
responding set of speakers is on.
VR-4900/KRF-V9993D: If you select SPEAKERS B (Room B) while lis-
tening to a surround mode in Room A, the sound in Room A will auto-
matically revert to stereo. While SPEAKERS B is on surround made can-
not be selected.
VR-4700: If you select SPEAKERS B while listening to a surround mode,
the sound will automatically revert to stereo. While SPEAKERS B is on
surround made cannot be selected.
If you use speakers connected to amplifiers via the PRE OUT jacks, choose
Front A speakers.
10
Speaker indicators
I NPUT CD 2/TAPE 2 LISTEN
L SPEAKERS R
MODE MONITOR MODE SET UP SOUND
Speaker indicators
fi
I NPUT CD 2/TAPE 2 LISTEN
L SPEAKERS R MODE MONITOR MODE SET UP SOUND
fi % fi %
MULTI P.CALL MEMORY AUTO BAND
CONTROL
% fi %
MULTI
P.CALL MEMORY AUTO BAND
CONTROL