To Set The Listen Mode Manually - Kenwood VR-4700 Connection Manual

How Do I Adjust the Sound?

To Set the Listen Mode manually:

1. Touch (listen mode) on the Quick Access menu to open the Lis-
ten Mode menu.
2. Select a Listen Mode you want.
Operation on the receiver:
1. Press the LISTEN MODE key inside the door repeatedly until the lis-
ten mode to be set is displayed.
After 5 seconds, the display of the set listen mode returns to the previ-
ous menu
• The available surround modes may be restricted depending on the
input signal. DTS, Dolby Digital and MPEG are only available if a
DTS, Dolby Digital or MPEG signal is present at the digital input.
• In FULL AUTO or DIDITAL-AUTO mode, if the incoming signal is not
Dolby Digital, DTS or MPEG, the listen mode reverts to the last listen
mode you selected for that input.
• If the speakers are turned off (i.e., because you are listening on head-
phones), you cannot select Dolby Pro Logic or Dolby 3 Stereo.
23