Chapter Three: Using Powertouch In Multiple Rooms (Vr-4900/Krf-V9993D) - Kenwood VR-4700 Connection Manual

How Do I Switch Control Modes?
Chapter Three: Using PowerTouch in Multiple
Rooms (VR-4900/KRF-V9993D)
The VR-4900 and KRF-V9993D offers dual-room output and control,
which enables you to use a single receiver to control devices and speak-
ers for 2 rooms. Due to its advanced features and controls, you can listen
to music in one room while a movie plays in the other!
Depending on your tastes and budget, you can set up one of the follow-
ing "sound scenarios" to make full use of the VR-4900/KRF-V9993D's
capabilities:
No additional amplifier for Room B: You can use the VR-4900/KRF-
V9993D's Speaker B output for Room B. This allows you to listen to full
surround sound in Room A only, or in stereo in Room A when Room B is
active. The sound in Room B will always be in stereo.
Stereo amplifier for Room B: You use an additional stereo amplifier
for Room B (connected to the VR-4900/KRF-V9993D's Second Room Pre-
outs). This allows you to hear full surround sound in Room A even if you
are also listening in Room B. The sound in Room B will always be in
stereo.
This chapter covers only multiple-room operation of the VR-4900/KRF-
V9993D. See Chapter Two for general operating instructions.
85