JVC DLA-SX21U Instructions Manual page 50

What to do when these messages are displayed
Message
1000h
Lamp replacement
Lamp replacement
WARNING
50
When the "Lamp time" reaches 1000 hours
A message indicating "1000 h" appears on the projected screen.
[
• Press any key to delete the message.
EXIT
Every time the projector is turned on, this message appears on the screen
when the accumulated lamp time reaches between 1900 hours to 2000 hours.
Press any button to delete the message.
[
Get ready a new light-source lamp or replace the light-source lamp at
this point.
EXIT
The word "Warning" appears and blinks when the accumulated lamp time
reaches 2000 hours.
The message can be cleared by pressing the EXIT button. However, the
same message will appear again every one-hour.
Once the projector is turned off, it does not turn on again if the accumulated
lamp time has exceeded 2000 hours.
EXIT
When the accumulated lamp time reaches 2010 hours, the projector is forci-
bly shut off and cannot be turned on again.
Replace the light-source lamp and reset the "Lamp time".
[
(☞ page 43, 45)
Note
The message display language corresponds to the menu language set-
ting. This is set to "English" when the projector is bought. The display
language can be selected from 8 languages. (☞ page 39)
However, the input mode (PC 1,PC 2, PC 3, Y/C, VIDEO) and button
indications (FREEZE, D.ZOOM, EXIT) are only displayed in English ir-
respective of the display language setting.
Cause (Contents)