Installing The Projector Against The Screen; Mounting The Projector - JVC DLA-SX21U Instructions Manual

Installing the Projector

Installing the Projector against the Screen

The projector should be placed so that the center line of the lens is at a right angle to the screen as in the following figures.
Side View
●
Trapezoidal-distortion can be corrected using the KEYSTONE
☞
button on the projector. (

Mounting the Projector

When mounting of the projector is required, do it using the embedded three screw holes (M6 nuts) at the bottom of the projector.
16
page 30)
Up to approximately 30˚ upward
and downward from the horizon-
tal line.
Top View
Precaution for ceiling-mount
• To ceiling-mount and adjust the projector, special exper-
tise and techniques are necessary. Be sure to ask your
dealer or specialist to perform the work.
• Do not mount on places that will be subjected to knocks
and vibrations.
• As the depth of the screw holes is 10mm, use screws
shorter than 10mm but longer than 6mm. Otherwise, the
screws will damage the internal parts of the projector
causing malfunction.
Up to approximately 10˚ upward and
downward from the vertical line.