Additional Functionality For The Metronome - Roland CD-2e Features Manual

Additional Functionality for the Metronome

You can now set the tempo of the metronome by pressing the [
(Tap Tempo function). In addition, you can now adjust the volume of the metronome.
1
2
3
6
Follow the procedure described in steps 1–2 on Page 98 in the Owner's
Manual.
Setting the tempo.
Value
=20–120 (factory setting)–250
Adjust the volume.
Value
-6–0 (factory setting)–6
fig.menu-metro03-e.eps
Press the [EXIT] button to return to the menu screen.
Use the [ ] [ ] buttons to choose "Tempo."
Press the [ENTER] button to confirm your choice.
Set the metronome tempo.
There are two ways to set the tempo.
• Use the [+] [-] buttons to change the tempo value
• Specify the desired tempo by tapping it out using the
[ ] button
The tempo value will be changed to reflect the timing you've
used in pressing the [
Explanation
Specifies the number of quarter-notes in one minute.
Decreasing this value will make the tempo slower. Increasing this
value will make the tempo faster.
fig.menu-metro05-e.eps
Press the [EXIT] button to return to the menu screen.
Use the [ ] [ ] buttons to choose "Level."
Press the [ENTER] button to confirm your choice.
Use the [+] [-] buttons to adjust the metronome volume as
desired.
Explanation
The higher the value, the louder the volume.
☞
Owner's Manual; Page 98
] button at the desired interval
] button.