Deleting An Unwanted Region (Delete); Copying Performance Data (Copy) - Roland Workstation GW-8 Supplementary Manual

3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.

Deleting an Unwanted Region (Delete)

This function deletes the performance data of the specified
region. Performance data that follows the deleted region will
be moved forward to fill the gap. The performance data will
be shortened by the amount that was deleted.
1. In the "Song Edit Menu," select "3. Delete" and press
[ENTER].
The SONG EDIT DELETE screen will appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
Part ALL, 1–16
From
0001: 01:
(MEAS:
000–
BEAT: TICK)
To (MEAS: 0001: 01:
BEAT: TICK)
000–
3. Select "EXECUTE" and then press [ENTER].
It is not possible to restore the data to its original state after
executing this operation.
] to move the cursor to the
Explanation
Selects the Song part from
which data is to be deleted.
Specifies the beginning of
the region to be deleted.
Specifies the end of the
region to be deleted.

Copying Performance Data (Copy)

This function copies the performance data of the specified
region. This is convenient when you want to re-use existing
performance data.
1. In the "Song Edit Menu," select "4. Copy" and press
[ENTER].
The SONG EDIT COPY =SOURCE= screen will appear.
2. Use [ ] [ ] [ ] [
parameter that you want to change, and use the VALUE
dial to make the desired settings.
Parameter Value
SOURCE settings
Part ALL, 1–16
From
(MEAS: 0001: 01: 000–
BEAT: TICK)
To (MEAS:
0001: 01: 000–
BEAT: TICK)
ALL, NOTE, PITCH
Data Type
BEND, CC, PC
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
C–(Range Max
Range Min
value)
If Data Type= CC:
0–(Range Max value)
(Only when Data Type= NOTE or CC)
If Data Type= NOTE:
(Range Min Value)–
Range Max
G9
If Data Type= CC:
(Range Min value)–
127
Creating a New Song
] to move the cursor to the
Explanation
Selects the copy-
source Song part.
Specifies the
beginning of the
region to be copied.
Specifies the end of
the region to be
copied.
Specifies the type of
data to be copied.
Specifies the lowest
note (Note) or lowest
value (CC) of the
data that is to be
copied.
Specifies the highest
note (Note) or
highest value (CC) of
the data that is to be
copied.
33