Adjusting The Amount Of Ambience For Each; Pad (Send); Turning The Multi-Effect On/Off For Each Pad; (Switch) (Td-15 Only) - Roland TD-11 Owner's Manual

Adjusting the Amount of
Ambience for Each Pad (SEND)
You can adjust the amount of ambience (the send level)
for each pad.
1.
Access the AMBIENCE screen as described in
steps 1–3 of the basic procedure (p . 19) .
2.
Press the [F3] (SEND) button .
The AMBIENCE SEND screen will appear.
3.
Press the [F1] (LINK) button to turn Link on/off .
4.
Select a pad, either by striking that pad or by
pressing the [F2] ( ) or [F3] ( ) buttons .
The cursor will move to the pad you selected.
Link icon
Move the cursor within the screen.
If you press the [F1] (LINK) button to make the Link icon
light (on), the parameters of the head and rim (for a
cymbal, the bow and edge; for a ride cymbal, the bow,
edge, and bell) can be edited simultaneously.
If this is off, each can be set independently.
Indication in the
Pad
screen
K Kick
S
Snare
T1–T3
Tom 1–3
HH
Hi-hat
C1, C2 Crash 1, 2
RD Ride
Pad connected to the AUX jack
AUX
Ambience send amount from MFX
MFX
5.
Use the value dial to specify the amount of
ambience (send level) .
Value
6.
Press the [EXIT] button several times to return to
the DRUM KIT screen .
Turning the Multi-Effect On/Off for
Each Pad (SWITCH)
You can specify whether the multi-effect will be applied
to each pad (on) or not applied (off ).
1.
Access the MULTI-FX screen as described in steps
1–3 of the basic procedure (p . 19) .
2.
Press the [F3] (SWITCH) button .
The MULTI-FX SWITCH screen will appear.
3.
Press the [F1] (LINK) button to turn Link on/off .
4.
Select a pad, either by striking that pad or by
pressing the [F2] ( ) or [F3] ( ) buttons .
The cursor will move to the pad you selected.
For details on the screen, refer to the explanation of the
AMBIENCE SEND screen (p. 21).
5.
Use the value dial to turn the effect on/off .
6.
Press the [EXIT] button several times to return to
the DRUM KIT screen .
Creating a Drum Kit
0–100
21