Setting The Alarm Times - Roberts RecordR Manual

Dab / fm rds / sd digital radio recorder with pauseplus
Hide thumbs Also See for RecordR:
Table of Contents

Advertisement

Setting alarm times
Your radio has four alarms which can be set to wake you to DAB, FM radio,
SD card or beep type alarm. Each alarm can be set to sound once, daily,
on a specifi c date, weekdays, weekends or weekly. The alarms may be set
while the unit is in Standby mode or while playing. Alarms cannot be used
when running on batteries as the clock is reset from the DAB broadcast
and does not run in battery mode.
Note: If no buttons are pressed for several seconds, your radio will exit
the alarm setup.
1. Press and hold the Info button. Press the Tuning Up or Down buttons
until 'Alarm Set' shows on the display.
2. Press and release the Select button to enter the alarm setup. Alarm
1' fl ashes on the display.
3. Press the Tuning Up or Down buttons to select the desired alarm
timer 1, 2, 3 or 4.
4. Press and release the Select button. The alarm status will fl ash on
the display.
5. Press the Tuning Up or Down buttons to select On or Off. If 'Off' is
selected any current setting for that alarm will be cancelled.
6. Press and release the Select button. The alarm hour will fl ash on the
display.
7. Press the Tuning Up or Down buttons to set the alarm hour. Press
and hold the Tuning Up or Down buttons to advance the time quickly.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
1-7
1-7
2,6
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents