6. Bed Cover
1. Remove presser foot and needle plate.
2. Turn hand wheel toward you until needle comes to its highest point.
3. Lay machine on its back.
4. Remove bottom cover from free arm. (See page 5)
5. Remove 2 screws (1) and 2 washers (2).
6. After lifting up bed cover (6) toward direction A, take it out toward direction B.
NOTE: Lift presser foot lever to its highest position for easy removal.
( 6 )
( 2 )
B
A
* Re-assembling should be done in the reverse way.
( 1 )
( 6 )
SECTION
1
PAGE
6