Table of Contents
Advertisement
Trouble
Hose will not fully
retract
Hose will not retract at
all
Reel will not latch
Fluid leaks from swivel
Troubleshooting
Cause
1. Outlet nozzle, gun or tool is too
heavy.
2. Spring is fatigued.
3. Replacement hose is too long.
Spring has lost all tension or has
possibly broken.
1. Incorrect operation.
2. Dog spring or locking cam is
broken or worn.
Swivel seals are worn.
6
Remedy
1. Add spring tension. See
"Adjustment of Spring Tension."
2. Add spring tension. See
"Adjustment of Spring Tension."
Replace spring canister if
required.
3. Call local Distributor for correct
specified hose length.
1. Reinstall spring tension
2. Replace spring canister. Have a
JET Authorized Repair Station
replace the spring canister.
1. Reel latches on first, second,
third or fourth "click". After forth
"click" it automatically rewinds.
2. Replace dog spring or locking
cam.
Replace swivel seals. See
"Replacement of Swivel Seal." Be
sure leak is not at hose fitting.
Advertisement
Table of Contents
