Finishing The Seam; Beginning Of The Seam; End Of The Seam; Knotting The Threads - Janome COVER PRO 900CP Instruction Book

w
e
t
r

Finishing the Seam

To achieve the best results, use a piece of scrap fabric at
q
the beginning and end of the seam.

Beginning of the seam

1 Raise the presser foot and insert a piece of scrap
fabric under the foot. Lower the foot and turn the
handwheel several times toward you.
Depress the foot control to start sewing slowly.
q Handwheel
2 Stop sewing at the end of the scrap fabric.
Insert the work fabric after the scrap as shown, then
start sewing on the work fabric.
w Scrap fabric
e Work fabric

End of the seam

3 Stop sewing at the end of the work fabric.
Insert another piece of scrap fabric after the work
fabric as shown, then sew through the scrap.
r Another scrap fabric
4 Cut the connecting threads between the work fabric
and scrap fabric.
t Connecting threads

Knotting the threads

Draw the needle threads to the wrong side of the
fabric by using a pair of tweezers and knot them together.
17