RIDGID SeekTech SR-60 Operator's Manual page 5

SeekTech SR-60
SR-60 Use and Care
•
Use equipment only as directed. Do
not operate the SR-60 unless you have
read the operator's manual.
•
Do not immerse the antennas in
water. Store in a dry place. This will
reduce the risk of electric shock and
instrument damage.
•
Store idle equipment out of the
reach
untrained
dangerous in the hands of untrained
users.
•
Maintain the instrument with care.
Properly maintained diagnostic
instruments are less likely to cause
injury.
•
Check for breakage of parts, and any
other conditions that may affect the
SR-60's operation. If damaged, have
the instrument serviced before using.
Many accidents are caused by poorly
maintained tools.
•
Use only
recommended by the manufacturer
for the SR-60. Accessories that may
be suitable for one instrument may
become hazardous when used on
another.
•
Keep handles dry and clean, and
free from oil and grease. Allows for
better control of the instrument.
•
Protect against excessive heat. The
product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products that
produce heat.
Service
•
Diagnostic instrument service must
be performed only by qualified repair
personnel. Service or maintenance
performed
personnel could result in injury.
•
When
instrument,
replacement parts. Follow instructions
in the maintenance section of this
manual. Use of unauthorized parts or
failure
Ridge Tool Company
of children and
persons. Equipment
accessories that
by unqualified
servicing a diagnostic
use only identical
to follow maintenance
Elyria, Ohio
•
•
•
other
is
•
are
Remove batteries entirely before shipping.
If you have any questions regarding the service or
repair of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail:
www.ridgid.com
repair
U.S.A
www.seektech.com
instructions may create a risk of
electrical shock or injury.
Follow instructions for changing
accessories. Accidents are caused by
poorly maintained equipment.
Provide proper cleaning. Remove
battery before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
Conduct a safety
completion of any service or repair of
this product, ask the service technician
to perform safety checks to determine
that the product is in proper operating
condition.
Damage to the product that requires
service. Remove the batteries and
refer servicing to qualified service
personnel under any of the following
conditions:
o If liquid has been spilled or objects
have fallen into product;
o If product does not operate normally
by following
instructions;
o If the product has been dropped or
damaged in any way;
o When the product exhibits a distinct
change in performance.
CAUTION
TechServices@ridgid.com
check. Upon
the operating
3