Advertisement
Parts
Front Legs
Rear Legs
Inflatable Ball
#8 x ¾" Screw - 5
Tighten all screws with a Phillips
screwdriver. Do not over-tighten.
Body
4 Feet
2
Assembly
This product contains small
parts in its unassembled state.
Adult assembly is required.
Body
Front Legs
1 1
•
Fit the tab on the front legs into the
opening under the head on the body.
Push the front legs into the opening.
Hint: This may require some force.
1 2
•
Turn the assembly over.
Hint: Be sure to place the assembly on a
protective surface to prevent scratching.
•
Insert a screw into the hole near the front
legs and tighten.
CAUTION
Screw
BOTTOM VIEW
Advertisement
