Advertisement
Car Lift
9
•
Fit the tabs on the car lift into the slots on the wall, as shown.
Balconies
10
•
Fit the balconies into the slots in the wall assembly, as shown.
Hint: The balconies are designed to fit one way. If a balcony does
not seem to fit, turn it over and try again!
•
Push to "
snap" each balcony in place.
Assembly
11
•
Slide the elevator onto the end of the wall assembly, as shown.
12
•
Fit the top ramp onto the assembly.
•
Insert three screws into the holes in the ramp and tighten.
7
Elevator
3 Screws
Top Ramp
Advertisement
