Ramp
Labeled 3
5
3.
•
Locate the ramp labeled
•
Fit the ends of the ramp into the slots in the wall and base,
as shown.
Hint: The tab at the top of the ramp has a green dot on it. Match
this dot to the slot with the green dot.
snap" the bottom of the ramp into the base.
•
Push the "
Ramps
Labeled 1
6
•
Locate three of the ramps labeled
•
Fit the ends of the ramps into the slots in the wall, as shown.
Assembly
Green Dots
Top View
Top View
1.
Ramps
Labeled 1
7
•
Carefully turn the assembly around.
•
Fit the ends of the three ramps labeled
as shown.
•
While holding each ramp in place, push the ramps on both sides
of the wall to "snap" in place.
Ramps
Labeled 1
8
•
Fit the ends of the remaining ramps labeled
the wall, as shown.
•
While holding each ramp in place, push the ramps on both
sides of the wall to "snap" in place.
6
BACK
FRONT
1 into the slots in the wall,
FRONT
BACK
1 into the slots in