Features; Power Button; Light Limiting Ring; Dome - ION Holiday Party Plus Quick Start Manual

Features

1. Remote Control Sensor: Aim the remote
control here to adjust the options.
2. Thumbscrew: Loosen and tighten this at
the angle you want the light to be
projected.
Note: Attach the included Light Limiting
Ring to reduce the overall spread of the
lights.
3. Stake: Place this into the ground to secure
Holiday Party Plus.
4. Flat Surface
unscrewing the thumbscrew, remove the
stake, and replace the stake with the stand.
5. Dome: This projects the different colored
lights.
6. Power Button: Press and release to power
on. Press and hold for 2 seconds to power
off. In the event the remote control is lost,
the Power button allows for cycling through
the light modes by quickly pressing and
releasing the Power button. However,
individual color
performed with the remote control.
7. Light Limiting Ring: Align the groove on
the ring with the sensor and snap in place
using some force. This will limit the overall
coverage of the lights up to 30%, useful for
preventing light from spilling onto a
neighbor's house.
6
Stand: Attach this
selection must
by
7
be
1
6
5
2
3