Table of Contents
Advertisement
Configuring the iMcV-PSE-Midspan with iView²
The PSE-MidSpan has been designed for use with a managed chassis, configured
through iView² software. To configure the PSE-MidSpan, open the iView2 software
and select the chassis in which the PSE-MidSpan has been installed. When Auto
Discovery detects the chassis and identifies the PSE-MidSpan, select it to configure
The screen that appears will show the PSE-Midspan's LEDs and settings. The LEDs
appear on the left, showing the LEDs as they are displayed on the PSE-MidSpan. The
settings, on the right, appear as follows:
Module Number
This displays the slot number in which the PSE-MidSpan
has been installed.
Module Type
This space displays the type of module inserted in this
slot. The PSE-MidSpan will appear with the name
"iMcV MidSpan".
Data Port
Use this field to enter a name for the device connected
to the Data Port. Click the Save Changes button to
save this name.
POE Data Port
Enter a name for the device connected to this port in
the Description field. Then, enable or disable the POE
function from the drop-down menu beneath. Click the
Save Changes button to save this information to iView².
4
Advertisement
Table of Contents
